How to mix the Resin
Different brands of Resin have different ratio of clear and hardener mixing. The amount is mentioned in the label of the bottle.
I have used three different brands of Resin and have observed the following
A resin that cures very fast like within an hour has a very short working time as opposed to one that takes 24hrs to cure. A fast curing resin will be more viscous and a slow curing one will be very fluid in the beginning.
Temperature also affects the curing process. If the room is very cold it would be a good idea to dip the clear and the hardener bottle in some warm water with the bottle cap closed to make it more fluid.
Use a weighing scale to measure the amount of Clear and Resin. Once you pour both the liquid in a paper cup use a popsicle stick to mix it well. Mix slowly and gently to avoid getting a lot of air bubbles. The slow curing resins usually are easy to mix and give less bubbles.
To remove bubbles use a flame lighter or a heat gun and go over the surface where you have poured the resin for about 5-6 seconds. Do not use it for long as it will affect the curing process.
Different brands of Resin have different ratio of clear and hardener mixing. The amount is mentioned in the label of the bottle.
I have used three different brands of Resin and have observed the following
A resin that cures very fast like within an hour has a very short working time as opposed to one that takes 24hrs to cure. A fast curing resin will be more viscous and a slow curing one will be very fluid in the beginning.
Temperature also affects the curing process. If the room is very cold it would be a good idea to dip the clear and the hardener bottle in some warm water with the bottle cap closed to make it more fluid.
Use a weighing scale to measure the amount of Clear and Resin. Once you pour both the liquid in a paper cup use a popsicle stick to mix it well. Mix slowly and gently to avoid getting a lot of air bubbles. The slow curing resins usually are easy to mix and give less bubbles.
To remove bubbles use a flame lighter or a heat gun and go over the surface where you have poured the resin for about 5-6 seconds. Do not use it for long as it will affect the curing process.
No comments:
Post a Comment