So guys i am a little confused as to what name i can give to this project. It is a fun project that uses a DC motor, an on/off switch, fan and paper. I reused the motor and fan from the Wiggle bot project. The only extra thing you need is a small piece of cardboard and some sketch pens. So lets get started.
You need the following things:
1. DC motor
2. Fan
3. On/Off switch
4. Small piece of cardboard
5. A base to hold the motor. You can use a small cardboard box
1. Connect the DC motor to the On/Off switch and place the fan on the motor. I used a thermacol as a base for the motor but it kept falling off when i switched on the motor. So use a stronger base to hold the motor.
2. Place the fan on the motor and put a double sided foam tape on the fan Place the cardboard piece on the fan.
3. Switch on the motor and use your sketch pen to make cool designs
You need the following things:
1. DC motor
2. Fan
3. On/Off switch
4. Small piece of cardboard
5. A base to hold the motor. You can use a small cardboard box
1. Connect the DC motor to the On/Off switch and place the fan on the motor. I used a thermacol as a base for the motor but it kept falling off when i switched on the motor. So use a stronger base to hold the motor.
2. Place the fan on the motor and put a double sided foam tape on the fan Place the cardboard piece on the fan.
No comments:
Post a Comment